Camo Deck Screws and Tools
CAMO ProTech & Stainless Steel Screws
Designed for use with CAMO Marksman tools only
Proprietary Design – Patent Pending
A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting
A star drive offers more points of contact for better performance and reduces bit slippage and wear
An aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry
A unique trimhead design provides a less visible point of entry
Choices for Corrosion Resistance/ACQ Compatibility
ProTech Coated –1500 hour salt spray
316 Stainless Steel – ultimate in corrosion resistance; recommended for coastal environments
- 48mm (1-7/8") - For use with any nominal 19mm -25mm (3/4"-1") deckboard - ProTech and Stainless Steel
- 60mm (2-3/8") - For use with any nominal 19mm-38mm (3/4"- 1 1/2") deckboard - ProTech and Stainless Steel
This is a must on all thinner hardwoods (21mm and below) also when working within 25mm of the end of a board.
Use a 4mm drill bit, pre-drill then fasten using the CAMO driver bit as normal. (2 Cordless drills make this a much simpler operation)
If you are not sure or have any questions please call us on 0845 299 6455
Approx. coverage per pack
Pack of 350 including 1 CAMO driver bit Covers approx 100 square feet (9.2 square metres) Pack of 700 including 2 CAMO driver bit Covers approx 200 square feet (18.4 square metres) Pack of 1750 including 2 CAMO driver bits Covers approx 500 square feet (46.4 square metres)
Exceeds ASTM Uplift Resistance in all solid and grooved wood, composite, and PVC boards tested. CAMO also exceeded ASTM Thermal Cycling standards in all solid wood, composite, and PVC and boards tested.
CAMO offers a Limited Lifetime Warranty that guarantees against rust and corrosion for the life of the project.